If the noise is excessive, check for low power steering pump fluid level before seeking service by your authorized dealer. Remove the jack and lug nut wrench by turning the thumbscrew counterclockwise to relieve tension against the stowage bracket. Contact your dealer if the window sticker is not supplied with your vehicle. Do not use the seat anchors as cargo tie downs. For forward-facing child seats, the tether strap must also be attached to the proper tether anchor. If any other door has been opened from the inside, the lamp will shut off immediately after the door is closed.
Please take the time to get well acquainted with your vehicle by reading this handbook. Loosen the hose clamp located closest to the air cleaner. If it is not possible to distribute the load, position it as far rearward as possible. Refer to Safety restraints for children or Safety seats for children later in this chapter. Refer to the payload description and graphic in the Vehicle loading — with and without a trailer section. There are several plans available in various time, distance and deductible combinations which can be tailored to fit your own driving needs. These quality accessories have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and aerodynamic appearance of your vehicle.
Protect yourself from engine heat. Maybe you need the manual to fix the brakes on your Monterey, or possibly replace some worn out suspension components. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmission of the radio-frequency signal. Position the seat in vehicle. Press the control to open the storage compartment. Remove the two retainer pins to release the headlamp assembly and pull headlamp assembly forward to expose the back of the bulb. Set the parking brake and shift to P Park.
With step-by-step instructions, clear pictures, exploded view illustrations, schematics, and specifications, you will have the information you need to get your project on the road and keep it there. The Safety Canopy injure you as it deploys from the headliner. Failure to properly stow the spare tire may result in failure of the winch cable and loss of the tire. For air bags to do their job they must inflate with great force, and this force can pose a potentially deadly risk to occupants that are very close to the air bag when it begins to inflate. When working near the battery, always shield your face and protect your eyes.
Make sure the headlamps and electrical accessories are off. Follow the instructions in this chapter. To obtain reimbursement information, U. Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. Snap the two halves back together. Connect the other end of the positive + cable to the positive + terminal of the assisting battery.
Tape eject: Press to eject a tape. See your authorized dealer or a reliable trailer dealer if you require assistance. The seatback must be folded flat prior to installation. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. If the level falls below, add coolant per the instructions in the Adding engine coolant section. Information on common causes of battery drain problems.
Do it yourself and use this 2004 Mercury Monterey repair manual software to guide the way. From the rear of the vehicle, fold seat back by pulling and releasing the number 1 strap. It will help you fix the brakes, engine, suspension, steering, drivetrain, electrical problems, heat, air conditioning, etc. To remove the side marker bulb, turn the bulb socket counterclockwise, and pull the bulb straight out of the socket. See the illustration for approximate sensor area coverage. Refer to Inflating Your Tires in the Tires, Wheels and Loading chapter. Note: Do not start your engine with the air cleaner removed and do not remove it while the engine is running.
Safety belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted. If there are less than six strong stations, the system will store the last one in the remaining presets. Unlock the secondary locking retainer by rotating the top portion one-quarter turn and remove it from the outer hole in the tire. Press again to deactivate the passenger cooled seat. In Canada, many fuels contain metallic additives, but fuels free of such additives may be available; check with your local fuel dealer. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground.
If the problems persist, see your dealer or a qualified service technician. Disconnect the Mass Air Flow Sensor electrical connector from the air outlet tube. Close the hood and turn off the lamps. If the door still does not operate correctly: 7. If a replacement oil filter is used that does not meet Ford material and design specifications, start-up engine noises or knock may be experienced. Please contact your dealer for further information. The belt will click as it retracts to indicate it is in the automatic locking mode.