I will try your hillbilly fix this afternoon. Start the engine and allow it to run for two minutes and fully operate the system that was malfunctioning. A mechanic friend of mine has such a diagnostic tool. He said that he had the mechanic check tolerances of all related parts as suggested by a Chrysler Corp. The codes would give you a pretty good idea as to what is going on. It gave a more comprehensive read out and more codes.
To do this you'll need to start the car and then turn the wheel slowly all the way to the left, pause and then turn slowly all the way to the right, pause and return to center. You have an electrical connection at the rear wheels secured to the inside of the brake area and are viewable from under the vehicle. Now, lights came back and every speed sensor seems fine. We identified problem was front-right wheel after finding a mechanic with the proper scan-tool dealership totally missed it and was unable to diagnose. I felt behind there gently to see if I could feel the sensor, but realized it was a futile attempt and gave up. Then when I had accel. Thanks for getting back to us with the fix.
The front wheel bearings were loud. Mine came on as soon as I started the car. Sorry this cost you so much with no satisfaction. How difficult is it to replace this module yourself?? The hub was replaced and everything was fine for 2 more weeks. Aug 21, 2014 Nov 24, 2013 Oct 4, 2011 Jan 27, 2016.
Same symptoms as this time, code c2200, checked per manual and it points to a internal short in module. The contact also mentioned that the abs and air bag light is also illuminated. Does anybody know what having these four warning dashboard lights come on mean? Van was all packed with the wife and kids and luggage for a long weekend. The contact was sure of two injuries and suspects that there were injuries in the other vehicle. I went to work and thought nothing of it. Do you guys think all 3 items need to be done to fix this issue? I took it to the dealer a really good one that I have found and it stored a code that said the wheels lost traction and the steering wheel turned 5 degrees.
Suggestion Danacat, next time it happens perhaps you can video it with your phone. Engine power may also be reduced to help the vehicle maintain the desired path. He didn't know if it was like that out of the box or if the mechanic broke it during the original installation. They never returned for a few days no all of sudden they are coming on here and there. They never gave me a direct answer, but said they fixed the problem. Good thing you had the extended warranty.
The reason why I say this is, I used such a device to diagnose my problem. When will this end and are all these things related to the recalls? This is beginning to sound like the clock spring in the steering column. Pls post back how things turned up or should you need additional information. I've checked into the newbie section. Turn the ignition off and wait five seconds. When Limousine Mode is selected, the rear passengers can control the total cabin audio system.
This means you probably have a wheel speed sensor that is out but to confirm the issue use this video to gather codes to see which one it is. Took it home a second time and made it all of the way home 15 miles and light came back on making a left turn into the driveway. Thank you for using FixYa, have a nice day Posted on Jul 06, 2012 It's in limp mode. I got all the stuff fixed and sure enough on the way to work the lights came on and of course the dealership is right next to each other. Now tonight I am driving and going down a straight road and the lights all came on along with the ding. I may replace the battery and see if that helps, battery is orignal and has 121K miles on it.
It appears the module is not repairable, unlike the 4th gen ones. Prop1, I'll keep an eye on those brake lights. They should go out with the engine running. I have replaced the faulty sensor and reset the codes and took it for a drive for a few minutes at various speeds and on return home the 1417 code has disappeared but the abs, esp bas and traction control lights remain on. Now I use my turn signal and manually return the signal lever on left turns prior to completion of the turn.
It been like this with power and stability since it was purchase new from the dealer. If it does it again, we'll have the switch replaced. Yeah I am figuring it is coincidence or maybe a bad wheel sensor which both front sensors were replaced with the new hub assemblies. That was several hundred miles ago. Here is a guide that will help you if you dont have a scanner Check out the diagrams Below Please let us know if you need anything else to get the problem fixed.
This is normally needed after a dead or weak battery condition. We were already told the controlmodule needs replacing but because this is not a 4X4 it is not covered in the recall. No more warning lights, you know, the ones I had since Friday night, the ones that were on the vehicle at the dealership when I got turned away Saturday! Do not reduce brake pedal pressure unless braking is no longer desired. Considering there's 3 of us on this board that have gone through this and I've had to wait 2+ days already for parts since they're on backorder, it's probably safe to assume this will be happening to more people going forward. Light stays out until I forget and use the signal! Brake work never seems to be inexpensive, does it? Do this on both sides and see if the lights turn off. Car is just fine and normal.