Cruise control indicator will be dis- played on the multi-information dis- play. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Do-it-yourself maintenance Turn the bulb base counter- clockwise. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. Select the desired contact to add to the favorites list. Do-it-yourself maintenance Remove the light bulb.
To change the preset station to a different one, select and hold the preset station. To operate the Mobile Assis- tant, a compatible cellular phone must be registered and connected to ®. Failure to do so may result in death or serious injury. Instrument cluster Gauges and meters Tachometer Displays the engine speed in revolutions per minute. However, this does not indicate a malfunction.
When the indicator light on the key surface is not on, press and hold for approximately 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below. The call history can be deleted and contact and favorites can be changed. Insert the retaining hooks clips into the floor mat eyelets. Set the voice recognition tuto- rial. Have the vehicle inspected at your Toyota dealer. The emergency flashers can be used. The back and front seats are comfortable and have plentiful rear-seat legroom.
Setup Display settings Settings are available for adjusting the contrast and brightness of the screen. For details, refer to the manual pro- vided with the multimedia system or navigation system. Taking out the spare tire Lift up the hook of the luggage floor cover on the trunk floor. Basic Operations Operating the touch screen By touching the screen with your finger, you can control the multime- dia system, etc. Moreover, a rear-facing child seat will fit in back with ease. Specifications Maintenance data fuel, oil level, etc.
Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture. Other interior features Programming a Rolling Code system for U. Failure to do so may result in serious injury such as burns. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. If you cross over a map boundary shown in illustration, the compass will deviate.
Instrument cluster Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. Even so, the car drinks a little when the fuel motor involves life soon after resting at idle for a when. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Other interior features Ashtray if equipped An ashtray can be installed in the cup holder. If the device is inoperable or a function is unavailable due to a mal- function as opposed to a system specification , disconnecting the device and reconnecting it may resolve the problem.
Check that the shift lever is in P. Repair, or replacement, or for any damage they may cause to, adverse, effect they may have on, your Toyota vehicle, this vehicle should not be modified with non-genuine Toyota products, or durability, and may even violate governmental regulations. Connect the clamp on the other end of the positive cable to the positive + battery terminal on the second vehicle. Evaporation leakage check and, it does not indicate malfunction, accessories, spare parts and modification your Toyota, a wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available in the market, not warrant these products and is not responsible their performance. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen. Operating the switch moves the windows as follows: Closing One-touch closing front side windows only Opening One-touch opening front side windows only : To stop the window partway, oper- ate the switch in the opposite direc-. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible.
Do-it-yourself maintenance Wipe the dipstick and reinsert it fully. Operations of the voice command system can be performed by selecting the menu corresponding to each function on the screen. This prevents the vehicle from creeping. If the switch is pressed improperly, the engine may not start or the engine switch mode may not change. To turn off the alarm, lock all the doors. When the acceleration exceeds the Eco driving accelerator upper limit, or the vehicle is stopped, the light turns off.
When installing, reverse the steps listed. Contact your Toyota dealer to service the vehicle. Have the vehicle inspected by your Toyota dealer immediately. Steps to take in an emergency Firmly tighten each wheel nut two or three times in the order shown in the illustration. Rear-going through infant car seats fit quickly in the back again row, but the resolved headrests hinder top-facing car-seat installment. Select to connect the device to be used with multimedia sys- tem.